Trinity Highway QuadGuard Elite M10 Wide, Руководство по сборке изделия

Страница: 28 / 68

TrinityHighway.com 27 Revision A August 2020
5) Deploy Diaphragms
Orient a Diaphragm so that the front face of the Quad-Beam shape faces toward the Nose of
the system as shown in Figure 24. Slide one Diaphragm all the way to the Backup to ensure
the system is able to collapse properly during impact. Once this has been verified, slide the
Diaphragm forward to approximately 32” [813 mm] in front of the Backup. Orient and slide all
Diaphragms onto Monorail and position each approximately as shown below (Figure 25).
6) Attach End Cap
Attach End Cap to the Monorail as shown in Figure 26 and the Monorail Assembly drawing.
Figure 24
Diaphragm Orientation
36” [915 mm] (Typical)
36” [915 mm] (Typical)
Figure 26
End Cap Attachment
Figure 25
Diaphragm spacing
5/8 HEX NUT (SMALL)
FRONT
QUAD-BEAM
BACK
TOWARD NOSE
5/8 LOCK WASHER
MONORAIL
END CAP
5/8X3 1/2 G5 HEX BOLT
72” [1830 mm] (Typical)