Trinity Highway QuadGuard Elite M10 Wide, Руководство по сборке изделия

Страница: 36 / 68

TrinityHighway.com 35 Revision A August 2020
16) Attach Hit Indicator to Diaphragm No. 1
The Hit Indicator should be the last component attached to the system. Fasten the Hit Indicator
to the first Diaphragm as shown in Figure 39. Offset component to right side of Diaphragm.
Step 1.
Position Hit Indicator on 1
st
Diaphragm. Center Hit Indicator between Diaphragm
Extension and edge of Diaphragm. Drill one 1/4" hole as needed to set bracket tab
in Diaphragm.
Step 2.
Attach hit indicator to 1
st
Diaphragm.
Option 1.
Match drill two 9/16” holes as needed in Diaphragm. Use 1/2" hex bolts,
1/2" lock washers, and 1/2" hex nuts to attach bracket (p. 53).
Option 2.
Use 1/4" self-dr tap screws along with flat washer to attach bracket.
Step 3.
Rotate Hit indicator to horizontal position and bend trigger clip around top of 2
nd
Diaphragm (Figure 40).
Figure 39
Attach Hit Indicator
Figure 40
Rotate Hit Indicator/Bend Trigger Clip
HIT INDICATOR
1/4X1 SCREWS
1/2 LOCK WASHER
1/2 HEX NUT
1/2X1 HEX BOLT