Trinity Highway QuadGuard Elite M10 Wide, Руководство по сборке изделия

Страница: 16 / 68

TrinityHighway.com 15 Revision A August 2020
Foundation/Anchoring
Warning:
It is the responsibility of the local DOT or appropriate highway authority
to ensure that this assembly conforms to the AASHTO Roadside Design Guide.
Warning:
It is the responsibility of the installer to ensure that your assembly
procedure meets all appropriate Occupational Safety and Health Administration
(“OSHA”) and local standards.
Asphalt Installations
Warning:
QuadGuard
®
Elite M10 Wide has not been tested on asphalt.
Concrete Installations
Recommended dimension and reinforcement specifications for new concrete pads can be found
on the standard drawings.
The QuadGuard
®
Elite M10 69” may be installed on any of the following foundations using the
specified anchorage:
Foundation A: Reinforced Concrete Pad or Roadway
Foundation: 6” [152 mm] (reinforced)
with Anchor Block
minimum thickness P.C.C.
Anchorage: Approved adhesive with 7” [ 178 mm] studs 5 1/2” [140 mm] embedment
Foundation B: Reinforced or Non-Reinforced Concrete Pad or Roadway
Foundation: 8” [203 mm] minimum thickness P.C.C.
Important:
To prevent sliding during impact, the pad must be placed against or
tied to an existing structure. Additional below grade supports may also be
necessary as the project engineer directs.)
Anchorage: Approved adhesive with 7” [178 mm] studs 5 1/2” [140 mm] embedment