TRENDnet TL2-FG142, Руководство пользователя

Страница: 96 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
91
Items Description
QCE# Indicates the index of QCE.
Port Indicates the list of ports configured with the QCE.
Frame Type Indicates the type of frame to look for incoming frames. Possible frame
types are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.
SMAC Displays the Source MAC address.
If a port is configured to match on DMAC/DIP, this field is the
Destination MAC address.
DMAC Specify the type of Destination MAC addresses for incoming frame.
Possible values are:
Any: All types of Destination MAC addresses are allowed.
Unicast: Only Unicast MAC addresses are allowed.
Multicast: Only Multicast MAC addresses are allowed.
Broadcast: Only Broadcast MAC addresses are allowed.
The default value is 'Any'.
VID Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in
the range 1-4095 or 'Any'
PCP Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between
0, 1 or 'Any'.
Action Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class: Classified QoS class.
DPL: Classified Drop Precedence Level.
DSCP: Classified DSCP value.
Modification Buttons
You can modify each QCE (QoS Control Entry) in the table using the following buttons:
Add: Inserts a new QCE before the current row.
Edit: Edits the QCE.
Up: Moves the QCE up the list.
Down: Moves the QCE down the list.
Delete: Deletes the QCE.
Add: The lowest plus sign adds a new entry at the bottom of the QCE listings.
QoS Control List Configuration
This page allows to edit|insert a single QoS Control Entry at a time. A QCE consists of
several parameters. These parameters vary according to the frame type that you select.