TRENDnet TL2-FG142, Руководство пользователя

Страница: 98 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
93
string and read from left to right, all bits following the first zero must
also be zero. If a port is configured to match on DMAC/DIP, this field is
the Destination IP address.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range
of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-
CS7, EF or AF11-AF43.
IP Fragment IPv4 frame fragmented option: yes|no|any.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP.
6. IPv6
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'.
Source IP 32 LS bits of IPv6 source address in value/mask format or 'Any'.
If a port is configured to match on DMAC/DIP, this field is the
Destination IP address.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range
of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-
CS7, EF or AF11-AF43.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP.
Action Parameters
Items Description
Class QoS
class Class QoS class: (0-7) or 'Default'.
DPL DP Valid Drop Precedence Level can be (0-1) or 'Default'.
DSCP DSCP Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or
'Default'.
'Default' means that the default classified value is not modified by this
QCE.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
Click to undo any changes made locally and return to the previous page.
4.3.29.12 Storm Control
There is a unicast storm rate control, multicast storm rate control, and a broadcast
storm rate control. These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC)
pair not present on the MAC Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast
traffic across the switch.
Items Description
Frame Type The settings in a particular row apply to the frame type listed here:
Unicast, Multicast or Broadcast.
Enable Enable or disable the storm control status for the given frame type.
Rate The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16,
32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or
1024K.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.