TRENDnet TL2-FG142, Руководство пользователя

Страница: 88 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
83
The displayed settings are:
Items Description
Port The port number for which the configuration below applies.
Enabled Controls whether the policer is enabled on this switch port.
Rate Controls the rate for the policer. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps" or "fps", and it is
restricted to 1-3300 when the "Unit" is "Mbps" or "kfps".
Unit Controls the unit of measure for the policer rate as kbps, Mbps, fps or
kfps . The default value is "kbps".
Flow Control If flow control is enabled and the port is in flow control mode, then
pause frames are sent instead of discarding frames.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.29.3 Queue Policing
This page allows you to configure the Queue Policer settings for all switch ports.
The displayed settings are:
Items Description
Port The port number for which the configuration below applies.
Enabled (E) Controls whether the queue policer is enabled on this switch port.
Rate Controls the rate for the queue policer. The default value is 500. This
value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-3300 when the "Unit" is "Mbps".
This field is only shown if at least one of the queue policers are enabled.
Unit Controls the unit of measure for the queue policer rate as kbps or Mbps.
The default value is "kbps".