TRENDnet TL2-FG142, Руководство пользователя

Страница: 95 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
90
Ingress Ingress side DSCP can be first translated to new DSCP before using the
DSCP for QoS class and DPL map.
There are two configuration parameters for DSCP Translation -
1. Translate
2. Classify
1. Translate DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify Click to enable Classification at Ingress side.
Egress There are the following configurable parameters for Egress side -
1. Remap DP0 Controls the remapping for frames with DP level 0.
2. Remap DP1 Controls the remapping for frames with DP level 1.
1. Remap DP0 Select the DSCP value from select menu to which you want to remap.
DSCP value ranges form 0 to 63.
2. Remap DP1 Select the DSCP value from select menu to which you want to remap.
DSCP value ranges form 0 to 63.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.29.10 DSCP Classification
This page allows you to configure the mapping of QoS class and Drop Precedence Level
to DSCP value.
The displayed settings are:
Items Description
QoS Class Actual QoS class.
DPL Actual Drop Precedence Level.
DSCP Select the classified DSCP value (0-63).
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.29.11 QoS Control List
This page shows the QoS Control List(QCL), which is made up of the QCEs. Each row
describes a QCE that is defined. The maximum number of QCEs is 256 on each switch.
Click on the lowest plus sign to add a new QCE to the list.