TRENDnet TL2-FG142, Руководство пользователя

Страница: 64 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
59
MLD Snooping VLAN Table Columns
Items Description
Delete Check to delete the entry. The designated entry will be deleted during
the next save.
VLAN ID The VLAN ID of the entry.
MLD
Snooping
Enabled Enable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for
MLD Snooping.
Querier
Election Enable to join MLD Querier election in the VLAN. Disable to act as a MLD
Non-Querier.
Compatibility Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of MLD operating on hosts and
routers within a network.
The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv2,
default compatibility value is MLD-Auto.
PRI Priority of Interface.
It indicates the MLD control frame priority level generated by the
system. These values can be used to prioritize different classes of traffic.
The allowed range is 0 (best effort) to 7 (highest), default interface
priority value is 0.
RV Robustness Variable.
The Robustness Variable allows tuning for the expected packet loss on a
link.
The allowed range is 1 to 255, default robustness variable value is 2.
QI Query Interval.
The Query Interval is the interval between General Queries sent by the
Querier.
The allowed range is 1 to 31744 seconds, default query interval is 125
seconds.
QRI Query Response Interval.
The Maximum Response Delay used to calculate the Maximum Response
Code inserted into the periodic General Queries.
The allowed range is 0 to 31744 in tenths of seconds, default query
response interval is 100 in tenths of seconds (10 seconds).
LLQI Last Listener Query Interval.
The Last Listener Query Interval is the Maximum Response Delay used to
calculate the Maximum Response Code inserted into Multicast Address
Specific Queries sent in response to Version 1 Multicast Listener Done
messages. It is also the Maximum Response Delay used to calculate the
Maximum Response Code inserted into Multicast Address and Source
Specific Query messages.
The allowed range is 0 to 31744 in tenths of seconds, default last listener
query interval is 10 in tenths of seconds (1 second).
URI Unsolicited Report Interval.
The Unsolicited Report Interval is the time between repetitions of a
node's initial report of interest in a multicast address.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.