TRENDnet TL2-FG142, Руководство пользователя

Страница: 53 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
48
bridges a root bridge can distribute its BPDU information to. Valid values
are in the range 6 to 40 hops.
Transmit
Hold Count The number of BPDU's a bridge port can send per second. When
exceeded, transmission of the next BPDU will be delayed. Valid values
are in the range 1 to 10 BPDU's per second.
Advanced Settings
Items Description
Edge Port
BPDU
Filtering Control whether a port explicitly configured as Edge will transmit and
receive BPDUs.
Edge Port
BPDU Guard Control whether a port explicitly configured as Edge will disable itself
upon reception of a BPDU. The port will enter the error-disabled state,
and will be removed from the active topology.
Port Error
Recovery Control whether a port in the error-disabled state automatically will be
enabled after a certain time. If recovery is not enabled, ports have to be
disabled and re-enabled for normal STP operation. The condition is also
cleared by a system reboot.
Port Error
Recovery
Timeout The time to pass before a port in the error-disabled state can be
enabled. Valid values are between 30 and 86400 seconds (24 hours).
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.15.2 MSTI Mapping
This page allows the user to inspect the current STP MSTI bridge instance priority
configurations, and possibly change them as well.
Configuration Identification
Items Description
Configuration
Name The name identifying the VLAN to MSTI mapping. Bridges must share the
name and revision (see below), as well as the VLAN-to-MSTI mapping
configuration in order to share spanning trees for MSTI's (Intra-region).
The name is at most 32 characters.
Configuration
Revision The revision of the MSTI configuration named above. This must be an
integer between 0 and 65535.
MSTI Mapping
Items Description