TRENDnet TL2-FG142, Руководство пользователя

Страница: 46 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
41
These setting are common for all of the RADIUS servers.
Items Description
Timeout Timeout is the number of seconds, in the range 1 to 1000, to wait for a
reply from a RADIUS server before retransmitting the request.
Retransmit Retransmit is the number of times, in the range 1 to 1000, a RADIUS
request is retransmitted to a server that is not responding. If the server
has not responded after the last retransmit it is considered to be dead.
Deatime Deadtime, which can be set to a number between 0 to 1440 minutes, is
the period during which the switch will not send new requests to a server
that has failed to respond to a previous request. This will stop the switch
from continually trying to contact a server that it has already determined
as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this
feature, but only if more than one server has been configured.
Key The secret key - up to 63 characters long - shared between the RADIUS
server and the switch..
NAS-IP-
Address
(Attribute 4) The IPv4 address to be used as attribute 4 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing interface
is used.
NAS-IPv6-
Address
(Attribute 95) The IPv6 address to be used as attribute 95 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing interface
is used.
NAS-
Identifier
(Attribute 32) The identifier - up to 255 characters long - to be used as attribute 32 in
RADIUS Access-Request packets. If this field is left blank, the NAS-
Identifier is not included in the packet.
Server Configuration
The table has one row for each RADIUS server and a number of columns, which are:
Items Description
Delete To delete a RADIUS server entry, check this box. The entry will be deleted
during the next Save.
Hostname The IP address or hostname of the RADIUS server.
Auth Port The UDP port to use on the RADIUS server for authentication.
Acct Port The UDP port to use on the RADIUS server for accounting.
Timeout This optional setting overrides the global timeout value. Leaving it blank
will use the global timeout value.
Retransmit This optional setting overrides the global retransmit value. Leaving it
blank will use the global retransmit value.
Key This optional setting overrides the global key. Leaving it blank will use the
global key.
Button
Click Add New Server to add a new RADIUS server. An empty row is
added to the table, and the RADIUS server can be configured as needed. Up to 5 servers
are supported.
The Delete button can be used to undo the addition of the new server.
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.11.2 Server Configuration
This page allows you to configure the servers.