TRENDnet TL2-FG142, Руководство пользователя

Страница: 100 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
95
sFlow configuration is not persisted to non-volatile memory, which means that a reboot
will disable sFlow sampling.
Agent Configuration
Items Description
IP Address The IP address used as Agent IP address in sFlow datagrams. It serves as
a unique key that will identify this agent over extended periods of time.
Both IPv4 and IPv6 addresses are supported.
Receiver Configuration
Items Description
Owner Basically, sFlow can be configured in two ways: Through local
management using the Web or CLI interface or through SNMP. This
read-only field shows the owner of the current sFlow configuration
and assumes values as follows:
• If sFlow is currently unconfigured/unclaimed, Owner contains
<none>.
• If sFlow is currently configured through Web or CLI, Owner
contains <Configured through local management>.
• If sFlow is currently configured through SNMP, Owner contains a
string identifying the sFlow receiver.
If sFlow is configured through SNMP, all controls - except for the
Release-button - are disabled to avoid inadvertent reconfiguration.
The Release button allows for releasing the current owner and
disable sFlow sampling. The button is disabled if sFlow is currently
unclaimed. If configured through SNMP, the release must be
confirmed (a confirmation request will appear).
IP
Address/Hostname The IP address or hostname of the sFlow receiver. Both IPv4 and
IPv6 addresses are supported.
UDP Port The UDP port on which the sFlow receiver listens to sFlow
datagrams. If set to 0 (zero), the default port (6343) is used.
Timeout The number of seconds remaining before sampling stops and the
current sFlow owner is released. While active, the current time left
can be updated with a click on the Refresh-button. If locally
managed, the timeout can be changed on the fly without affecting
any other settings.
Max. Datagram
Size The maximum number of data bytes that can be sent in a single
sample datagram. This should be set to a value that avoids