TRENDnet TL2-FG142 Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 134

background image

© Copyright 2019 TRENDnet. All Rights Reserved.

TRENDnet User’s Guide

TL2-FG142

94

4.3.30 Mirror

To debug network problems, selected traffic can be copied, or mirrored, on a mirror
port where a frame analyzer can be attached to analyze the frame flow.

The traffic to be copied on the mirror port is selected as follows:

All frames received on a given port (also known as ingress or source mirroring).

All frames transmitted on a given port (also known as egress or destination mirroring).

Items

Description

Port to mirror
to

Port to mirror also known as the mirror port. Frames from ports that
have either source (rx) or destination (tx) mirroring enabled are mirrored
on this port. Disabled disables mirroring.

Mirror Port Configuration

The following table is used for Rx and Tx enabling.

Items

Description

Port

The logical port for the settings contained in the same row.

Mode

Select mirror mode.

Rx only Frames received on this port are mirrored on the mirror port.
Frames transmitted are not mirrored.

Tx only Frames transmitted on this port are mirrored on the mirror port.
Frames received are not mirrored.

Disabled Neither frames transmitted nor frames received are mirrored.

Enabled Frames received and frames transmitted are mirrored on the
mirror port.

Note: For a given port, a frame is only transmitted once. It is therefore not possible to
mirror mirror port Tx frames. Because of this, mode for the selected mirror port is
limited to Disabled or Rx only.

Button

Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

4.3.31 sFlow

This page allows for configuring sFlow. The configuration is divided into two parts:
Configuration of the sFlow receiver (a.k.a. sFlow collector) and configuration of per-port
flow and counter samplers.

«
...
97
98
99
100
101
...
»

Содержание TL2-FG142







































































































































Отзывы:

Нет отзывов

Похожие инструкции для TL2-FG142

Бренд: Teac Страницы: 22

Бренд: Hamilton Beach Страницы: 24

Бренд: Hagerman Страницы: 9

Бренд: Hagerman Страницы: 4

Бренд: Yamaha Страницы: 29

Бренд: Yamaha Страницы: 2

M7CL StageMix V1.5

Бренд: Yamaha Страницы: 4

Бренд: Yamaha Страницы: 24

Бренд: Yamaha Страницы: 4

Бренд: AirTurn Страницы: 25

Bravetti Platinum Pro EP552HL

Бренд: Euro-Pro Страницы: 4

Бренд: TBProAudio Страницы: 8

Бренд: UNITED Страницы: 3

Бренд: Pyramid Страницы: 32

Бренд: IMG STAGE LINE Страницы: 26

Бренд: Sloan Страницы: 6

Pasta Prof PL10S

Бренд: R.G.V. Страницы: 52

Бренд: MFB Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды