TRENDnet TL2-FG142 Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 134

background image

© Copyright 2019 TRENDnet. All Rights Reserved.

TRENDnet User’s Guide

TL2-FG142

105

source MAC address from the most recently received frame from a new
client for MAC-based authentication.

QoS Class

QoS Class assigned to the port by the RADIUS server if enabled.

Port VLAN ID The VLAN ID that NAS has put the port in. The field is blank, if the Port

VLAN ID is not overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is
appended to the VLAN ID. Read more about RADIUS-assigned VLANs
here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the
VLAN ID. Read more about Guest VLANs here.

5.5.5 NAS - Port

This page provides detailed NAS statistics for a specific switch port running EAPOL-
based IEEE 802.1X authentication. For MAC-based ports, it shows selected backend
server (RADIUS Authentication Server) statistics, only .

Use the port select box to select which port details to be displayed.

Items

Description

Admin State The port's current administrative state. Refer to NAS Admin State for a

description of possible values.

Port State

The current state of the port. Refer to NAS Port State for a description of
the individual states.

QoS Class

The QoS class assigned by the RADIUS server. The field is blank if no QoS
class is assigned.

Port VLAN ID The VLAN ID that NAS has put the port in. The field is blank, if the Port

VLAN ID is not overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is
appended to the VLAN ID. Read more about RADIUS-assigned VLANs
here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the
VLAN ID. Read more about Guest VLANs here.

5.5.6 ACL Status

This page shows the ACL status by different ACL users. Each row describes the ACE that
is defined. It is a conflict if a specific ACE is not applied to the hardware due to hardware
limitations. The maximum number of ACEs is 256 on each switch.

5.5.7 ARP inspection

Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP
Inspection Table contains up to 1024 entries, and is sorted first by port, then by VLAN
ID, then by MAC address, and then by IP address.

5.5.8 IP Source Guard

Entries in the Dynamic IP Source Guard Table are shown on this page. The Dynamic IP
Source Guard Table is sorted first by port, then by VLAN ID, then by IP address, and then
by MAC address.

«
...
108
109
110
111
112
...
»

Содержание TL2-FG142







































































































































Отзывы:

Нет отзывов

Похожие инструкции для TL2-FG142

Architectural Acoustics MMA 800T

Бренд: Peavey Страницы: 12

Бренд: Mr. Black Страницы: 2

RED LLAMA Mk II WHE-203

Бренд: Way Huge Страницы: 2

Бренд: Peavey Страницы: 20

Бренд: TerraTec Страницы: 10

Бренд: Karel Страницы: 19

01.221206.02.001

Бренд: Princess Страницы: 8

Бренд: Orava Страницы: 18

satellite looper

Бренд: Eagletone Страницы: 5

Бренд: WERKU Страницы: 48

Бренд: Inter-m Страницы: 16

Бренд: Inter-m Страницы: 32

Бренд: Corsynth Страницы: 8

Stage five PS-55

Бренд: SKB Страницы: 8

Бренд: Eventide Страницы: 6

Бренд: Graef Страницы: 144

Бренд: U.S. General Страницы: 10

VC Panner Mixer 137

Бренд: M2SYNTH Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды