TRENDnet TL2-FG142 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 134

background image

© Copyright 2019 TRENDnet. All Rights Reserved.

TRENDnet User’s Guide

TL2-FG142

107

5.5.12 ROM History

This page provides an overview of RMON History entries. Each page shows up to 99
entries from the History table, default being 20, selected through the "entries per page"
input field. When first visited, the web page will show the first 20 entries from the
beginning of the History table. The first displayed will be the one with the lowest History
Index and Sample Index found in the History table.

The "Start from History Index and Sample Index" allows the user to select the starting
point in the History table. Clicking the Refresh button will update the displayed table
starting from that or the next closest History table match.

The >> will use the last entry of the currently displayed entry as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed
table. Use the |<< button to start ove

5.5.13 ROM Alarm

This page provides an overview of RMON Alarm entries. Each page shows up to 99
entries from the Alarm table, default being 20, selected through the "entries per page"
input field. When first visited, the web page will show the first 20 entries from the
beginning of the Alarm table. The first displayed will be the one with the lowest ID
found in the Alarm table.

The "Start from Control Index" allows the user to select the starting point in the Alarm
table. Clicking the Refresh button will update the displayed table starting from that or
the next closest Alarm table match.

The >> will use the last entry of the currently displayed entry as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed
table. Use the |<< button to start over.

5.5.14 ROM Event

This page provides an overview of RMON Event table entries.Each page shows up to 99
entries from the Event table, default being 20, selected through the "entries per page"
input field. When first visited, the web page will show the first 20 entries from the
beginning of the Event table. The first displayed will be the one with the lowest Event
Index and Log Index found in the Event table.

The "Start from Event Index and Log Index" allows the user to select the starting point in
the Event table. Clicking the Refresh button will update the displayed table starting from
that or the next closest Event table match.

The >> will use the last entry of the currently displayed entry as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed
table. Use the |<< button to start over.

5.6 LACP
5.6.1 System Status

This page provides a status overview for all LACP instances.

5.6.2 LACP Status

This page provides a status overview for LACP status for all ports.

«
...
110
111
112
113
114
...
»

Содержание TL2-FG142







































































































































Отзывы:

Нет отзывов

Похожие инструкции для TL2-FG142

Бренд: ZANDER Страницы: 9

Бренд: Oster Страницы: 9

Бренд: Behringer Страницы: 3

Бренд: Peavey Страницы: 16

Бренд: InoTec Страницы: 19

Бренд: Fender Страницы: 60

Бренд: Aurora Страницы: 10

Бренд: Electrolux Страницы: 4

Бренд: Electrolux Страницы: 4

Бренд: Electrolux Страницы: 4

DITO B3000 450 W

Бренд: Electrolux Страницы: 4

Бренд: HAEGER Страницы: 32

Бренд: Denon Professional Страницы: 8

Бренд: Central Machinery Страницы: 16

Tone-Lok PD7 PHAT-HED

Бренд: Ibanez Страницы: 2

Бренд: Ibanez Страницы: 2

Бренд: Altman Страницы: 4

Бренд: Gemini Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды