Trafox SUPERINTEND IC-01, Инструкция по установке и эксплуатации, Страница: 45 / 73

Superintend IMD © Copyright Muuntosähkö Oy - Trafox 45
http://www.trafox.fi
outage or removed from the
configuration.
Missing PE Channel Alarm Acknowledge [PE XX CH CC ]
The channel CC of the PEC-01
unit configured in PE address
XX has been restored from an
outage or removed from the
configuration. The alarm was
acknowledged manually.
PE Unit Removed [PE XX ]
The PEC-01 unit configured to
PE address
X X has been
removed from the network.
PE Unit Added [PE XX ]: CH CC R= N Ohm
The PEC-01 unit has been
added to PE address
XX . The
channel CC with N set as a
reference has been connected
to the unit. All channels
connected to the unit are listed
here.
PE Channel Added [PE XX CH CC ] R= N Ohm
The channel CC with N set as a
reference has been connected
to the PEC-01 unit configured
in the PE address
XX .
Network Scan Done, not confirmed
The Network Scan has been
performed but the
configuration identified was not
approved.
Network Scan Confirmed: TC XX
The Network Scan was
performed and the TC-01 unit
in the TC address XX
was
approved in the network.
Network Scan Confirmed: IC XX
The Network Scan was
performed and the IC-01 unit
in the IC address XX
was
approved in the network.
Network Scan Confirmed: RD XX
The Network Scan was
performed and the RD-01 unit
in the RD address XX
was
approved in the network.
Network Scan Confirmed: PE XX CH CC R= N Ohm
The Network Scan has been
performed, and a PEC-01 unit
in the PE address
XX has been
approved in the network. The
channel
CC , for which N was
approved as a reference, was
connected to the unit.
System Parameter changed [TranSize] [ N1 A]->[ N2 A]
The value of the TranSize
parameter (the primary
current of the current
transformer in load measuring,
with which the transformer
secondary current is 5 A) was
changed from
N1 to N2 .
System Parameter changed [Nom.Cur] [ N1 A]->[ N2 A]
The value of the Nom.Cur
parameter (the nominal
current of the isolation
transformer) was changed