Trafox SUPERINTEND IC-01 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 73

Trafox SUPERINTEND IC-01 Скачать руководство пользователя страница 27

Superintend IMD

© Copyright Muuntosähkö Oy - Trafox

27

http://www.trafox.fi

user. Send the device to maintenance if the battery is empty. Under normal conditions,
the useful life of the battery is more than 10 years.

SETUP MENU

The Setup menu can be used to change system settings, alarm limits, time etc. Before
using the system, a Network Scan must be performed. The PEC-01 units do no perform
any measurements and the IC-01/TC-01/RD-01 units do not give any alarms until the
devices connected to the IM-01.MED unit have been identified and their data has been
saved in the memory.

The Setup menu is password-protected and accessed as follows:



Go to the Setup menu in the main menu. The screen displays “Enter Setup”.
Press T.



Change the blinking number with the and buttons and press the button to
move to the next digit. Enter the three digits and press T. After this, you can
navigate the menu with the and buttons.



The B button takes you to the initial mode.

The default password is “123”. The password is saved in the setup log of the microSD
card and can be changed by editing the setup log file in a text editor. The password
change will become effective at the next start-up. If the password could not be read
from the card during start-up (the card was removed or defective), the default password
123 can be used.

All information on the other settings of the device alarm limits and the system are saved
in the internal EEPROM memory of the IM-01.MED unit. The device addresses and a list
of the PE channels’ resistances are saved after the first Network Scan. The microSD
card’s setup log always includes a time-stamped copy of the EEPROM values.

«
...
25
26
27
28
29
...
»

Содержание SUPERINTEND IC-01










































































Отзывы:

Нет отзывов