Trackmaster FVX325, Руководство по обслуживанию на месте

Страница: 60 / 205

TRACKMASTER
August, 2006 FVX, TMX Series Service Manual
5-29
5. Maximum Calibration Grade will appear in the Message Center with a default
setting of 25.00 in the Incline Window. This parameter sets the calibration grade
and does not limit elevation. For fitness units use numeric keypad and change to
15.00 and then press ENTER key. For medical units leave value at 25.0 and press
ENTER key.
Controller
Display Action required Changes
Affect Parameter Options Observe
Maximum
Calibration
Grade Enter Max Cal
Grade using
numeric keypad Maximum
calibration
grade 15 for 15% elevation
fitness units
25 for 25% elevation
medical units
Select Maximum
Grade then press
Enter appears in
Message Center
6. Select Maximum Grade Then Press Enter will appear in the Message Center with
a default setting of 15.0 in the Incline window. Using the numeric keypad, change
to 25.00 for medical units. For fitness units use default of 15.0. Press ENTER key.
Controller
Display Action Required Changes
Affect Parameter Options Observe
Select
Maximum
Grade then
Press Enter Enter Maximum
Grade needed using
numeric keypad Maximum
Elevation
Grade 25 for 25%
elevation medical
units Maximum
Correction Factor
appears in
Message Center
7. Maximum Correction Factor will appear in the Message Center with a default
setting of 4 in the Speed window. Do Not Change This Number. Press ENTER key.
8. Speed Ratio will appear in the Message Center with a default setting of 3175. Do
not change this Number unless instructed to by the manufacturer . Press ENTER
key.
9. Cool Time will appear in Message Center with a default setting of 60 in the
Distance window. Parameter is used to set the Cool down time period/Press ENTER
key.
Controller
Display Action Required Changes Affect Parameter
Options Observe
COOL
TIME Enter Cool-down
time desired
using numeric
keypad Sets Cool-down
time period Timer range:
0.01 seconds to
0.99 seconds
No Limit appears
in Message
Center
10. No Limit will appear in the Message Center. This parameter is the fixed timer that
limits treadmill workout time. Parameter activates time limit entered in step 2. Press
ENTER key.
Controller
Display Action Required Changes Affect Parameter
Options Observe
No Limit Activate Time
Limit control by
using incline
arrow keys Activates
workout time
limit set in step 2 Timer range:
1:00 minute to
99:00 minutes
Serial H-rate
appears in
Message Center