Trackmaster FVX325, Руководство по обслуживанию на месте

Страница: 61 / 205

TRACKMASTER
5-30
FVX, TMX Series Service Manual August, 2006
11. Serial H-rate will appear in the Message Center. This setting used when the
treadmill has the Contact Heart-rate feature. If the treadmill only has the Polar ®
Heart-rate feature, use incline arrows to change setting to
POLAR H-RATE . Press
ENTER key.
Controller
Display Action Required Changes
Affect Parameter Options Observe
Serial H-rate Select Serial Heart-
rate or Polar Heart-
rate by using
incline arrow keys
Select
combined
Polar &
contact heart
rate or Polar
only Select Serial H-rate
for use of Polar ®
chest strap & contact
heart-rate grips.
Select Polar ® H-rate
for chest-strap only
Medgraph
SCO appears
in Message
Center
12. Medgraph SCO will appear in the Message Center. Use the up Incline key to
change to Normal SCO . Medgraph SCO setting works only when the treadmill is
used in conjunction with a Medgraphics® Stress system. Press ENTER key.
Controller
Display Action Required Changes Affect Parameter
Options Observe
Medgraph
SCO Select Medgraph
SCO or Normal
SCO by using
incline arrow
keys Selection of Medgraph SCO
allows serial communication
with the Medgraphics®
systems only. Selection of
Normal SCO allows serial
communication with other
stress systems Medgraphics
SCO
Normal SCO
232 Comm
Off appears
in Message
Center
13. 232 Comm Off will appear in the Message Center. Use Incline down key to change
to ON if RS232 port is to be used. Otherwise, RS232 port should remain off. Press
ENTER key.
Controller
Display Action Required Changes Affect Parameter
Options Observe
232 Comm
Off Select 232 Comm Off
or 232 Comm On
by using incline
arrow keys
Selecting 232 Comm Off
cuts off RS232 port
Selecting 232 Comm On
restores RS232 port
communication
232 Comm Off
232 Comm On
HRS--- 0.00
appears in
Message
Center
14. HRS--0.00 . will appear in the Message Center. This is units’ total use time.
Parameter value cannot be changed .
15. DIS--0.000 will appear in the Message Center. This is the units’ total mileage.
Parameter value cannot be changed.