Trackmaster FVX325, Руководство по обслуживанию на месте

Страница: 59 / 205

TRACKMASTER
5-28
FVX, TMX Series Service Manual August, 2006
FVX__CP, TMX__CP – Programmable Controller
Software Download, Control Console Parameters, Speed/Elevation Calibration and Self-
test
Control Console Programming Mode
With main power ON and displays lighted, press the STOP key and the ENTER key at the
same time. When successful, the message center will scroll the following options:
1. Choose 1 for MPH -or- 2 for KM/H. Using the numeric keypad press 1 or Then
press ENTER key.
Controller
Display Action Required Changes
Affect Observe
Choose 1 for mph
or 2 for km/h Press 1 for mph
or Press 2 for
km/h Speed Units Time limit appears in
Message Center after
selection is made.
2. Time Limit will appear in the Message Center with a default setting of 15:00 in the
TIME window. Parameter sets the number of minutes displayed in the Time Limit
message. (Activating Time Limit control is performed in step 10). If no change is
needed press ENTER key, if a change is needed, use the numeric keypad to make
change and press ENTER key.
Controller
Display Action Required Changes
Affect Parameter
Options Observe
Time Limit Enter time limit
desired using
numeric keypad Workout
time Timer range:
1:00 minute to
99:00 minutes Minimum Speed
appears in Message
Center
3. Minimum Speed will appear in the Message Center with a default setting of 0.5 for
MPH or 0.7 for KM/H in the speed window. Press ENTER key.
Controller
Display Action Required Changes
Affect Parameter
Options Observe
Minimum Speed Enter minimum
speed needed
using numeric
keypad Treadmill
start speed 1.0 mph is
minimum speed
limit for 110v
units. Maximum Speed
appears in Message
Center after
selection is made
4. Maximum Speed will appear in the Message Center with a default setting of 12.0
for MPH or 19.3 for KPH in the Speed window. Press ENTER key.
Controller
Display Action Required Changes
Affect Parameter
Options Observe
Maximum Speed Enter maximum
speed needed
using numeric
keypad.
Treadmill
maximum
speed limit 10.0 mph is max
speed for 110v
units. Maximum Cal
Grade appears in
Message Center
At
Control
Console