Trackmaster FVX325, Руководство по обслуживанию на месте

Страница: 43 / 205

TRACKMASTER
5-12
FVX, TMX Series Service Manual August, 2006
11. P11 will appear in the Center Display with default setting of 15:00 in the Speed
Display. Parameter sets the number of minutes displayed in the Speed Display. If
no change is needed press START key. If a change is needed, use SPEED arrow
keys to make change, then press START key.
Controller
Display Action Required Changes
Affect Parameter Options Observe
P 11 Enter Time limit
desired using SPEED
arrow keys.
Workout
Time
Timer Range:
1:00 minute to 99:00
minutes.
“15:00” appears
in the Speed
Display.
12. P 12 will appear in the Center Display. The parameter is the fixed timer that limits
the treadmill workout time. Parameter activates time limit selected in step 15.
Press START key.
Controller
Display Action Required Changes Affect Parameter Options Observe
P 12 Activate time limit
control using the
INCLINE arrow keys.
Activates
Workout Time
Limit set in
step 15.
Timer Range:
1:00 minute to 99:00
minutes.
“OFF” appears
in the Speed
Display.
13. P 13 will appear in the Center Display with default setting of 60 in the Speed
Display. Parameter is the fixed timer that limits the treadmill workout time.
Parameter is used to set the Cool Down Time Period. Press START key.
Center
Display Action required Changes Affect Parameter Options Observe
P 13 Enter Cool Down
time desired using the
SPEED arrow keys
Sets Cool
Down time
period
1 second to 99
seconds
“60” appears in
the Speed
Display.
14. HRS will appear in the Incline Display. This is unit’s total use time. Parameter
value cannot be changed . Press SELECT key.
15. DIS will appear in the Center Display. This is the units’ total mileage.
Parameter value cannot be changed. Press SELECT key
16. CALS will appear in the Center Display. This function is used to calibrate speed.
Press the down INCLINE key, and the up SPEED key simultaneously. CAL will
appear in the Center Display. Press START key. When the treadmill has completed
this process, the Center Display will read DONE. If calibration fails,
SBAD will
appear in the Center Display. See trouble shooting procedures for SBAD. Press
SELECT key.
Center
Display Action Required Changes Affect Parameter Options Observe
CAL S Press up SPEED and
down INCLINE keys
simultaneously to
enter Speed
Calibration Mode Adjusts speed
accuracy at all
speed ranges;
low, medium,
and high
speeds
N/A
CAL appears in
Message Center