Trackmaster FVX325, Руководство по обслуживанию на месте

Страница: 33 / 205

TRACKMASTER
5-2
FVX, TMX Series Service Manual August, 2006
Safe Operation of Treadmill
TRACKMASTER® treadmills meet or exceed all applicable product safety requirements for
motor-operated exercise machines. TRACKMASTER® is listed by Engineering Testing
Laboratories (ETL); however, all motorized equipment is potentially dangerous if used
incorrectly. Before using the TRACKMASTER® treadmill, follow all precautions listed in this
chapter, and read the entire Owner’s Manual thoroughly. Use the TRACKMASTER® treadmill
only as described.
Serious injury could result from loss of balance or falls. To reduce the
possibility of serious injury, carefully observe the following precautions.
•
Read the Owner’s/Service Manual before operating the treadmill.
• Wear appropriate clothing and running shoes.
• Place the treadmill on a level, unobstructed surface.
• Connect the treadmill to a dedicated, properly grounded outlet that supplies the correct
voltage and amperage.
• Never stand on the belt when starting the treadmill.
• Do not step onto or off the belt when it is moving.
• Always slow the treadmill to its minimum speed before stopping.
• Never allow children or pets near the machine without careful supervision.
• Keep hands, feet, and clothing away from any moving parts.
• Never drop or insert objects into any opening.
• Avoid draping towels over the safety side rails or dropping objects on the belt while the
treadmill is running.
• Never place any foreign object on the treadmill.
• Verify no one is near the elevation mechanism before operating to avoid pinch points.
• Operator should be aware of speed malfunction and be ready to assist patients and stop
treadmill if necessary.
• Operator should be aware of elevation malfunction and be prepared to assist patient and stop
treadmill if necessary.
• Operator should always be aware of improper treadmill response to commands.
• Check treadmill before use. This includes:
– Check power cord connection.
– Check emergency stop button for proper operation.
– Check interface cable to ensure it is secure.
– Verify ECG communication is correct.
• Verify operator knows how to stop the treadmill in the event of malfunction or emergency.
• Make operator aware if treadmill is not responding properly to commands.
• Keep all cords clear of operator to avoid trip hazards.
• Operator should not wear loose fitting nylon material when exercising on treadmill to avoid
generating ESD.
• Operator needs to be aware of and note any components of the treadmill that are loose.
• Do not allow moisture or oils to accumulate on treadmill, creating a slip hazard.