background image

 

 

 

Fusion TREADMILL

 

 

1

BEFORE YOU BEGIN

 

 

Congratulations for selecting the Fusion Motorized Treadmill from Reebok.  Whether you are an accomplished athlete 
seeking to maintain peak performance or a beginner realizing the benefits of exercise for the first time, the fusion Motorized 
Treadmill will help you to achieve your goals.  In the “Hints to Help You” section of this manual we have outlined some tips 
that we hope will help you maximize the effectiveness and fun of your workouts. 
 
In the meantime, remember that the benefits of exercise are many and varied including higher energy levels, reduced 
stress, improved self-esteem, clearer and more radiant skin, greater cardiovascular efficiency, higher metabolic rate, and 
improved body posture – all of which can result in a longer and more enjoyable life. 
 
While purchasing the Fusion Motorized Treadmill will not do all of this alone, it is an important step towards understanding 
and achieving the benefits of exercise. 
 

 

 

All Reebok products are manufactured to the highest specifications and this 
instruction manual should enable you to assemble the Fusion Treadmill and 
commence your workout programme.  If, however, you have any additional 
questions, please call out UK Customer Service on +44 (0) 871 474 2614.  To help 
us assist you, please quote the product model number and batch number when 
calling.  The model number is REV-10301.  The serial number can be found on a 
sticker attached to the Reebok Fusion (located on the left hand side of the treadmill 
base next to the mains power cord inlet). 

 

 
 
 
 

Opening Carton/Assembling Your Product 

 

 

Содержание Fusion REV-10301










































Отзывы: