Fusion TREADMILL
38
HOW TO MAINTAIN THE FUSION TREADMILL
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance
could cause damage or shorten the life of your treadmill and exceed the LIMITED WARRANTY coverage.
IMPORTANT
: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids
away and keep it out of direct sunlight. Inspect and tighten all parts of the treadmill regularly. Replace any worn parts
immediately.
Belt Adjustment
The running belt has been adjusted properly by the factory. However transportation, uneven flooring or other unpredicted
reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end caps and possibly
causing damage. To adjust the belt back to it’s proper position please follow the directions below:
1. If your belt tends to walk to the right, rotate the right tension bolt clockwise. We recommend adjustments of 1/4 turn at a
time, and follow with a test. If your belt continues to walk to the right, simply adjust the left belt tension bolt by turning it
1/4 turn counterclockwise. Follow with a test.
2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time, and follow with a test. If the
belt continues to walk to the left, simply adjust the right tension bolt counterclockwise.
1. If your belt appears to be loose, simply tighten both bolts evenly 1/4 turn. If it appears tight, simply loosen both bolts
evenly 1/4 turn.
