Toyota 1RZ, Инструкция к добавке

Страница: 312 / 525

14. INSPECT CAMSHAFT FOR RUNOUT EM-47
15. INSPECT CAM LOBES EM-48
16. INSPECT CAMSHAFT JOURNALS EM-48
17. INSPECT CAMSHAFT BEARINGS EM-48
18. INSPECT CAMSHAFT GEAR SPRING EM-48
19. INSPECT CAMSHAFT JOURNAL OIL CLEARANCE EM-48
20. INSPECT CAMSHAFT THRUST CLEARANCE EM-49
21. INSPECT CAMSHAFT GEAR BACKLASH EM-49
22. INSPECT VALVE LIFTERS AND LIFTER BORES EM-49
23. INSPECT AIR INTAKE CHAMBER EM-49
24. INSPECT INTAKE MANIFOLD EM-50
25. INSPECT EXHAUST MANIFOD EM-50
26. INSPECT CHAIN TENSIONER EM-50
27. IF NECESSARY, REPLACE SPARK PLUG TUBE GASKETS EM-51
28. INSPECT CYLINDER HEAD BOLTS EM-51
REASSEMBLY
1. INSTALL SPARK PLUG TUBES
EM-52
2. INSTALL VALVES EM-52/53
3. INSTALL VALVE LIFTERS AND SHIMS EM-53
INSTALLATION
1. PLACE CYLINDER HEAD ON CYLINDER BLOCK
EM-54
2. INSTALL CYLINDER HEAD BOLTS EM-54
3. ASSEMBLE EXHAUST CAMSHAFT EM-55
4. INSTALL CAMSHAFTS EM-55/56
5. SET NO.1 CYLINDER TO TDC/COMPRESSION EM-56
6. INSTALL CAMSHAFT TIMING GEAR EM-56
7. INSTALL CHAIN TENSIONER EM-57
8. SET CHAIN TENSIONER EM-57
9. CHECK VALVE TIMING EM-58
10. CHECK AND ADJUST VALVE CLEARANCE EM-58
11. INSTALL SEMI-CIRCULAR PLUGS EM-58
12. INSTALL CYLINDER HEAD COVER EM-58
13. INSTALL ENGINE WIRE BRACKETS EM-58
14. INSTALL SPARK PLUGS EM-58
15. INSTALL CYLINDER HEAD REAR COVER EM-58
16. INSTALL WATER OUTLET EM-58
17. INSTALL EXHAUST MANIFOLD EM-58
18. INSTALL INTAKE MANIFOLD EM-58
19. INSTALL INJECTORS AND DELIVERY PIPE EM-59
20. INSTALL FUEL RETURN PIPE EM-59
21. INSTALL FUEL INLET PIPE EM-59
22. INSTALL AIR INTAKE CHAMBER ASSEMBLY EM-59
23. INSTALL INTAKE CHAMBER STAY EM-59
24. INSTALL EGR PIPE EM-59
25. CONNECT INJECTOR CONNECTORS EM-59
PAGE 2 OF 3
CLICK HERE TO VIEW CHAPTER INDEX
TO MODEL INDEX
Pages From Supplement
ENGINE MECHANICAL – CYLINDER HEAD (2RZ-FE)
CONTINUED
3RZ-F,3RZ-FE