Toyota 1RZ, Инструкция к добавке

Страница: 311 / 525

ENGINE MECHANICAL – CYLINDER HEAD (2RZ-FE)
PAGE 1 OF 3
CYLINDER HEAD (2RZ-FE) – COMPONENTS EM-31/32
REMOVEL
1. REMOVE PCV HOSES
EM-33
2. REMOVE IGNITION COILS EM-33
3. DISCONNECT ENGINE WIRE EM-33/34
4. DISCONNECT INJECTOR CONNECTORS EM-34
5. REMOVE EGR PIPE EM-34
6. REMOVE INTAKE CHAMBER STAY EM-34
7. REMOVE AIR INTAKE CHAMBER ASSEMBLY EM-34
8. REMOVE FUEL INLET PIPE EM-35
9. REMOVE FUEL RETURN PIPE EM-35
10. REMOVE DELIVERY PIPE AND INJECTORS EM-35
11. REMOVE INTAKE MANIFOLD EM-35
12. REMOVE EXHAUST MANIFOLD EM-36
13. REMOVE WATER OUTLET EM-36
14. REMOVE CYLINDER HEAD REAR COVER EM-36
15. REMOVE SPARK PLUGS EM-36
16. REMOVE ENGINE WIRE BRACKETS EM-36
17. REMOVE CYLINDER HEAD COVER EM-37
18. SET NO.1 CYLINDER TO TDC/COMPRESSION EM-37
19. REMOVE CHAIN TENSIONER EM-37
20. REMOVE SEMI-CIRCULAR PLUGS EM-37
21. REMOVE CAMSHAFT TIMING GEAR EM-37/38
22. REMOVE CAMSHAFTS EM-38/39
23. DISASSEMBLE EXHAUST CAMSHAFT EM-39
24. REMOVE CYLINDER HEAD EM-40
DISASSEMBLY
1. REMOVE VALVE LIFTERS AND SHIMS
EM-41
2. REMOVE VALVES EM-41
INSPECTION
1. CLEAN TOP SURFACES OF PISTONS AND CYLINDER BLOCK
EM-42
2. REMOVE GASKET MATERIAL EM-42
3. CLEAN COMBUSTION CHAMBERS EM-42
4. CLEAN VALVE GUIDE BUSHINGS EM-42
5. CLEAN CYLINDER HEAD EM-43
6. INSPECT FOR FLATNESS EM-43
7. INSPECT FOR CRACKS EM-43
8. CLEAN VALVES EM-43
9. INSPECT VALVE STEMS AND GUIDE BUSHINGS EM-44
10. IF NECESSARY, REPLACE VALVE GUIDE EM-44/45
11. INSPECT AND GRIND VALVES EM-45/46
12. INSPECT AND CLEAN VALVE SEATS EM-46/47
13. INSPECT VALVE SPRINGS EM-47
CLICK HERE TO VIEW CHAPTER INDEX
TO MODEL INDEX
Pages From Supplement
CONTINUED
3RZ-F,3RZ-FE