F-50
6.23 Secondary acceleration/deceleration
6.23.1 Acceleration and deceleration patterns
：
Acceleration/deceleration pattern #1
：
S-pattern lower limit adjustment amount
：
S-pattern upper limit adjustment amount
Title
Function
Adjustment range
Default setting
Acceleration/deceleration pattern #1
: Linear,
: S-pattern #1,
: S-pattern #2
S-pattern lower limit adjustment
amount
〜
[%]
S-pattern upper limit adjustment
amount
〜
[%]
１）
Linear acceleration and deceleration
Typical pattern of acceleration and
deceleration. This pattern is used in
most cases.
2) S-pattern acceleration/deceleration #1
This pattern is used in cases where
a motor needs to be speeded up to
or slowed down from a high-speed
range of over 60 Hz in a short time
or where there is a need to absorb
shocks at the start of acceleration
and deceleration. This pattern of
acceleration and deceleration is
suitable for the operation of
transportation and lifting equipment.
3) S-pattern acceleration/deceleration #2
In this pattern, the motor speeds up
slowly in weak-field areas where it
produces relatively small torque.
This pattern of acceleration and
deceleration is suitable for the
operation of high-speed spindles, etc.
・
Function
These parameters are used to select an acceleration pattern and a deceleration pattern.
[Hz]
Max. freq.
[s]
０
Effective acceleration time
Max. freq.
Setting freq.
×
%
×
%
[s]
[Hz]
0
Max. freq.
Setting freq.
Effective acceleration time
[Hz]
[s]
０
Base freq.
