![background image](http://html.mh-extra.com/html/toshiba/strata-ctx/strata-ctx_programming-manual_428810089.webp)
System
I/O Device
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
4-29
Sy
stem
801 Network Jack LAN Device Assignment
Prerequisite Program:
803
on page 4-27
and 804
on page 4-30
.
This screen assigns Strata CTX LAN
parameters, enabling PC applications
to connect to the BECU network jack.
1. From the Program Menu click
System > I/O Device. The
Equipment Assignment screen
displays.
2. Click the LAN Device tab. 801
Network Jack LAN Device
Assignments screen displays
(shown right).
3. Enter Program 801 data.
F
IELD
D
ESCRIPTION
00 LAN Port Number
Enter the port number of the LAN device to be assigned. Refer to
“803 SMDR SMDI
CTI Port Assignments”
on
page 4-27
.
Possible values: 1~12 (default = no value)
Notes
•
Program the local port number for LCD Control of Voice Mail
•
Use the same Device Port No. (11) for Network BLF.
•
Use 10 for Network TPI
•
Use 12 for Network DSS
•
Network BLF and DSS are available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
01 Protocol
Select communication Protocol.
Possible values: TCP (default) or UDP
Note
Select UDP for Network DSS.
02 PC Operation Type
Select the Operation Type.
•
If Server is selected, enter 04 Server Port Number.
•
If Client is selected, enter the 05 Client IP Address.
Possible values: Server (default) or Client
Note
Select Client for TPI.
03 Data Flow
Select the data flow protocol for CTX and PC communications.
Note
If the logical device set up in
“803 SMDR SMDI CTI Port Assignments”
on
page 4-27
is set to CTI, this field must be set to Asynchronous data flow.
Possible values: Synchronization or Asynchronization (default = Asynchronization)
04 Server Port Number
Enter the Server Port Number and proceed to 07 Read Retry Number. This field is
required if Server was selected in 02 PC Operation Type above. If not, leave this field
blank and proceed to 05 Client IP Address.
Possible values: 0~65535 (default = 0)
Note
Use 6000 for Network BLF, 3000 for Network DSS and 5000 for Network TPI.
6538
Содержание Strata CTX
