Toshiba Strata CTX Скачать руководство пользователя страница 96

Страница: 96 / 533

Station

Assignment

5-4

Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03

24 TGAC Override

Enable Trunk Group Access Code (TGAC) override (for Attendant console) from
this station.

Possible values: Enable or Disable (default)

25 Service Tones

Disable Service Tone for Data Privacy.

Possible values: Enable (default) or Disable

Note

Service tone such as Call Waiting should be disabled for modems, faxes,
and similar devices.

26 CW and ROB Tone

Enable/Disable the station to receive Call Waiting (Campon) and Ring Over Busy
Tone.

Possible values: Enable (default) or Disable

Notes

•

CW tone is always two beeps.

•

ROB tone can be two beeps or continuous as set in PRG 204, 27.

27 Name Display

Enable this station with the privilege to put the user name in the Directory
Assistance display of a large LCD.

Possible values: Enable (default) or Disable

28 Door Ovr DND

Enable DND override by door phone.

Possible values: Override or Do not Override (default)

30 Chg Sys Speed

Enable this station to use System Speed Dial.

Possible values: Enable or Disable (default)

31 Network COS

Select Network COS value.

Possible values: 1~32 (default = 1)

32 Auto OCA

OCA occurs automatically when making a call to a busy station that allows OCA
calls to be received.

Possible values: Enable or Disable (default = Enable)

33 Originate OCA

Enable this station with the privilege to make OCA calls to other stations.

Possible values: Enable (default) or Disable

34 RSTU Supervision

This enables the auto disconnect Tandem timer in Program 104, FB06 for these
types of Connections.

Possible values: Received (default) or Not Received

Possible values: Devices connected to RSTU circuits that do not automatically

hang up, and connect to CO lines that do not provide disconnect
supervision, should be set with “Not Received.”

35 Station SpDial Bins

The number of station speed dial bins allocated to this station:

Possible values: 0~100 (default = 0)

IELD

ESCRIPTION

Содержание Strata CTX






















































































































































































































































































































































































































































































































































Результаты поиска

Содержание Strata CTX

Отзывы:

Toshiba Strata CTX, Руководство по программированию, Страница: 96 / 533

Результаты поиска

Содержание Strata CTX

Отзывы: