Toshiba Strata CTX, Руководство по программированию

Страница: 129 / 533

Station
Setup Wizards
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
5-37
Stati
o
n
2. Click Start. The Primary DN Setup
Wizard screen displays (shown right).
3. Select the appropriate radio buttons
and enter the data in the other fields.
• Range of associated PDN
equipment.
• Selection to overwrite the existing
PDNs.
4. (Optional) Click Number Plan button
to access Numbering Plan page.
5. (Optional) Click PDN Table View
button to view existing PDN Table.
6. Press Start to create PDNs.
The screen containing the PDN assignments
(shown right) displays.
Note The first available equipment number
(card slot/circuit) is automatically used to
create the first PDN, etc.
Multiple DN Assignment Wizard
Important!
• To avoid conflicts on new installations, you should use this wizard immediately after establishing and
assigning Primary DNs on telephones, especially before you program key strips or hunt groups.
• The wizard can be used to assign Multiple DNs to new stations when adding new station cards.
This wizard substantially reduces CTX installation time when you need multiple DN buttons on
telephones. Multiple DNs are required in most CTX installations.
The wizard automatically programs multiple buttons onto telephones to operate as PDN buttons on the
telephones. This wizard automatically groups the telephone’s PDN button with the Phantom Directory
Number (PhDN) buttons so they all operate like PDNs on the telephone—this simulates Strata DK
multiple PDN operation. You will not have to set Call forward or VMID codes for the PhDNs since they
automatically assume the PDN Call Forward and VMID code assignments.
On these screens you need to specify how many button appearances should appear as PDNs on each
telephone or range of telephones (the number of buttons including the PDNs plus the PhDNs). You should
also specify the starting PhDN and Hunt Group number to be used to set up the multiple DN groups.