Toshiba Strata CTX, Руководство по программированию

Страница: 342 / 533

Telephone Button Programming
300 Series Programs
13-64
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
317-07 Bearer Svc - 3.1 KHz
Audio
)%
, n,
+ROG
n = 1. Enable (default)
2. Disable
Enable 3.1 KHz audio capability.
317-08 Bearer Svc - 7 KHz
Audio
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
Enable 7 KHz audio capability.
317-09 Bearer Svc -
Unrestricted 64K
)%
, n,
+ROG
n = 1. Enable (default)
2. Disable
Enable one of the unrestricted capabilities.
317-10 Bearer Svc -
Unrestricted 56K
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
317-11 Bearer Svc -
Unrestricted 2x64K
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
317-12 Outgoing B Ch Select
)%
, n,
+ROG
n = 1. Explicit
2. Preferred (default)
3. Any Channel
Select originating B Channel method.
• Explicit – Channel is indicated, and no alternative is acceptable.
•
Preferred – (default) Channel is indicated, and any alternative is
acceptable.
• Any Channel – Channel is indicated, and any channel is
acceptable.
317-13 B Ch Selection
)%
, n,
+ROG
n = 1. Forward Cyclic
2. Backward Cyclic
(default)
3. Forward Terminal
4. Backward Terminal
Choose Idle B Channel selection method.
•
Select Forward Cyclic (from lowest number to highest number of
B-channel).
• Select Backward Cyclic (from highest number to lowest number
of B-channel).
•
Select Forward Terminal for the lowest numbered B-channel.
Select Backward Terminal for the oldest number B-channel. (The
High-High B-channel selection)
317-14 Initialize Type
)%
, n,
+ROG
n = 1. User Entry Of SPID
Auto SPID ON
2. User Entry Of SPID
Auto SPID OFF
3. Auto SPID
4. None (default)
Enter the Service Profile Identifier (SPID) type of initialization.
317-15 Initialization Display
)%
, n,
+ROG
n = Up to 4 digits
(default = User) Enter the text to be displayed for SPID Initialization.
317-16 SPID #1
)%
, n,
+ROG
n = Up to 20 digits Enter the SPID value. These fields are required if you selected
National ISDN in Protocol. When no data is entered, any previously
entered information is overwritten.
317-17 SPID #2
)%
, n,
+ROG
n = Up to 20 digits
317-18 T-Wait Timer
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
Enable the T-Wait Timer. This field is needed if you selected National
ISDN in Protocol above. This timer, used along with the SPID, assigns
random initializing SPID times to prevent BRI interfaces from re-
initialize at the same time after a reset or power outage.
317-19 Voice Calls
)%
, n,
+ROG
n = 1. One
2. Two (default)
Select the number of simultaneous voice (speech) calls that can exist
at the same time on this interface.
317-20 Trunk Subscriber 1
)%
, n,
+ROG
n = Up to 10 digits Enter the telephone number for subscriber 1. Telephone number
should be consistent with D channel data. If no data is entered in this
field any previously programmed information is lost.
317-21 Trunk Subscriber 2
)%
, n,
+ROG
,
+ROG
n = Up to 10 digits Enter the telephone number for subscriber number 2. If no data is
entered in this field any previously programmed information is lost.
Programs 316~317
(continued)
Button Sequence Value(s) Summary