Toshiba Strata CTX, Руководство по программированию, Страница: 313 / 533

Telephone Button Programming
200 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
13-35
T
e
lep
hone
Button
Pr
o
g
ram
m
ing
204-16 Text Message Display
)%
, n,
+ROG
n = 1. Immediate
2. Not Immediate
Select whether to display an LCD text message.
•
Immediate - displays the message.
• Not immediate - does not display the message.
204-17 Call History Memory
)%
, n,
+ROG
n = 0~100 Enter the number of calls to be stored in memory for this station.
204-18 DTMF Back Tone
)%
, n,
+ROG
Not Used, has no effect on system operation
204-19 Continuous DTMF
)%
, n,
+ROG
n = 1. Continuous
2. Not Continuous
Enable / Disable Continuous DTMF.
For each iES32 PDN, set to “not Continuous”, if set to “Continuous”,
outdial notification to pagers and calls to AMIS nodes will not function
properly.
Possible values: Enable, Disable
204-20 Display Language
)%
, n,
+ROG
n = 1. English
2. British English
3. French
Select the LCD Display Language.
204-21 Adapter
)%
, n,
+ROG
n = 1. None
2. BPCI
3. BATI
Select the Adapter Type (Desktop OAI or Attendant Console).
•
None (default), BPCI or BATI
• BPCI – for USB interface.
•
BATI – for PC Attendant Console Interface.
204-22 Blind Transfer
)%
, n,
+ROG
n = 1. Leave
2. Separate
Set Blind Transfer Action (Attendant Type Only).
204-23 Mail Box Selection
)%
, n,
+ROG
n = 1. Auto
2. Manual
Select the method to enter the destination Mailbox for Call Recording.
If set to “Auto” CTX uses the VM ID of the station initiating the record
function.
Notes
•
The DN assigned as the MSG center in PROG 200 is used to call
the VM port or Hunt group (PROG 200 FK 22).
• When set to “Auto” the VM-ID of the station initiating the record
function is sent to Stratagy ES as the destination mailbox.
•
When set to “Manual Input” the user may enter any valid Mailbox
followed by the “#” sign. If the user Presses “#” without additional
data the CTX will send the VMID of the originating station.
204-24 MIC Init. Value
)%
, n,
+ROG
n = 1. On
2. Off
Turn on the microphone automatically when making a speaker phone
call. The microphone must be enabled.
204-25 Microphone
)%
, n,
+ROG
n = 1. Enable
2. Disable
Enable microphone.
204-26 Speaker Mode Tones
)%
, n,
+ROG
n = 1. Yes
2. No
Enable telephone to receive Call Waiting (Camp-on) and Ring Over
Busy Tone while on a speaker phone call.
204-27 Ring Over Busy
Cycles
)%
, n,
+ROG
n = 1. Two Cycles
2. Continuous
Set ROB to ring two times or continuously.
Note See PRG200, 26 to enable ROB to be sent to individual
telephones.
204-28 Attd Overflow Dest.
)%
, n,
+ROG
n = Up to 32 digits Select overflow destination for attendant.
204-29 Trunk Test and Verify
)%
, n,
+ROG
n = 1. Yes
2. No
Allow Trunk Tests and Verification.
204-30 Auto Line Hold
)%
, n,
+ROG
,
+ROG
n = 1. Enable
2. Disable
Enable Automatic Line Hold. This parameter allows a station to “line
hop” from one call to another automatically by placing the first call on
hold.
Programs 203~204
(continued)
Button Sequence Value(s) Summary