Toshiba Strata CTX, Руководство по программированию, Страница: 206 / 533

Services
Least Cost Routing/Destination Restriction
9-20
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
531 DR Screening Table for OLG
Prerequisite Program:
None
Assigns DR Screening Table for an OLG. Up to four codes may be assigned per line group. Used for
outgoing calls other than LCR.
04 Digit Modification
Action Select Digit Modification application.
Possible values:
•
Apply – (default) Apply Digit Modification from the first digit.
•
Retain – Retain the skipped digits and apply Digit Modification starting from
the next digit specified by Skip Length.
•
Discard – Discard the skipped digits and apply Digit Modification starting
from the next digit specified by Skip Length.
05 Skip Length Specify the number of digits at the beginning of the dial string to be ignored
before DR, Digit Modification, or LCR is applied.
Possible values: 0~5, 0 = delete (default = 0)
F
IELD
D
ESCRIPTION
00 Outgoing Line Group Enter the OLG Number.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic),
1~128 (CTX670 Exp.), (default = no value)
01 Behind Centrex Access
Code Enter the access code expected by an attached Centrex PBX.
Possible values: Up to 8 ASCII characters (default = no value)
02 Add or Delete Code Add or Delete the Code entered above. Leaving the field empty removes an
existing code. Activation requires entries in OLG Group number and 01 Behind
Centrex Access Code above.
Possible values: Add or Delete (default)
03 DR Action for Centrex Apply DR to the dialed digits.
Possible values:
•
Bypass (default) – does not apply DR.
•
Skip and Apply– applies DR to the dialed digits excluding the number of
digits specified in Skip Length.
04 Skip Length Enter the number of leading digits to be ignored by DR.
Possible values: 0~8 (default = 0)
05 Pause Length Enter the length of the pause to be inserted between dialing digits.
Possible values: 0~10 (default = 0)
F
IELD
D
ESCRIPTION