Toshiba Strata CTX, Руководство по программированию

Страница: 246 / 533

Operation
System Setup
10-2
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
900 CTX Restart
Prerequisite Program:
None
This program enables you to reset hardware and initializes or restores programmed data.
CAUTION!
Both commands will drop all existing calls.
Important! Choosing Initialize CTX without installing a SmartMedia Card deletes all programmed data
and returns your Strata CTX to factory default settings. All previously programmed data is
lost (See
“Restoring Data from SmartMedia” on page 10-2 ).
Restoring Data from SmartMedia
When initializing with Initialize CTX, you can restore custom data that was previously programmed and
stored on a SmartMedia card. To do so, follow the steps below.
1. Insert a SmartMedia card that contains the Progdata folder with the default.dat file. The default.dat
file contains your custom settings and can be created by running Data Backup. See “910 Data Backup”
on page 10-13 .
2. Run System Initialization by clicking Initialize CTX.
Notes
●
Restoring data from the SmartMedia card may take an hour or more.
●
During the restore process, the telephone LCD may display date and time data. This does not
necessarily indicate completion of the restore process.
●
To verify completion of the restore process access the Programming Mode from a telephone and enter
your password. If the system enables you to continue, the data restore process is complete.
F
IELD
D
ESCRIPTION
Restart CTX Clicking on this button initializes a System Power Off/Power On sequence to reset
hardware. This is also known as an Initialize Level 2.
Initialize CTX Clicking on this button invokes an Initialize Level 1 sequence which erases
programmed data and enters default data into the Strata CTX System.
If a Toshiba SmartMedia is installed in the available slot, using this option restores
data from backed up data from the SmartMedia (see
Restoring Data from
SmartMedia below).