Toshiba Strata CTX, Руководство по программированию

Страница: 297 / 533

Telephone Button Programming
100 Series Programs
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
13-19
T
e
lep
hone
Button
Pr
o
g
ram
m
ing
105-07 Credit Card Digits
)%
, n,
+ROG
,
+ROG
n = 1~66 digits Minimum Dial Digits required for Credit Card Calling. This should be
the quantity of digits in a credit card number. If this quantity of digits is
not dialed when making credit card calls, the caller will be
disconnected. This is to insure that the call is charged to a credit card.
DRL tables in Program 111 and OLGs in Program 306 must be
enabled with credit card calling for this feature to be active. Users
must be assigned to a DRL table enable with credit card calling and
call out on a credit card calling enabled OLG for this featured to be
applied to the call.
105-08 E911 Service
)%
, n,
+ROG
,
+ROG
n = 1. Enable (default)
2. Disable
Offer of E911 Service.
105-09 DR Override by SSD
)%
, n,
+ROG
,
+ROG
n = 1. Enable (default)
2. Disable
Destination Restriction Override by System Speed Dial.
105-10 Auto Station Release
)%
, n,
+ROG
,
+ROG
n = 1. Enable (default)
2. Disable
Automatic Station Release.
105-11 ISDN SPID
)%
, n,
+ROG
,
+ROG
n = 1. Operable
2. Not Operable (default)
Operation when Auto SPID or User Entry Of SPID fails.
105-12 Night Mode Relay
)%
, n,
+ROG
,
+ROG
n = 0~8 Assign BIOU Relay (1~8) as the Night Relay - this relay activates
when the
system is in the Night Mode.
BIUO1 provides relays 1 to 4.
BIUO2 provides relays 5 to 8
Note The CTX100 ACTU built-in relay is programmed as relay 5.
For this relay operation, a virtual BIOU2 is installed, as
default, in a virtual equipment position - Cabinet 2 slot 5.
(Cab. 02 slot 05, PCB code 20, in program 100). To install an
actual BIOU2 and disable the ACTU built-in relay, use the
programming telephone. To remove the virtual BIOU2 and
then install the actual BIOU2 in Cab. 01/slot 01~08 in the
normal manner.
105-13 BGM External Paging
)%
, n,
+ROG
,
+ROG
n = 0~4 (CTX100)
0~8 (CTX670 Basic)
0~16 (CTX100 Expanded) Set the External Page Group Number that includes the external
paging zones to which BGM will be sent. See PRG503.
105-14 Lost Call Destination
)%
, n,
+ROG
,
+ROG
n = Up to 5 digits Set Lost Call Destination.
105-15 COS Override Code
)%
, n,
+ROG
,
+ROG
n = 1~8
(default = 1)
Class of Service Override Code Digits.
105-16 Multi-Conference
)%
, n,
+ROG
,
+ROG
n = 1. Enable
2. Disable (default)
Conference connection of many member for Analog Internal Call and
Outgoing Call.
105-17 Caller Number
Display
)%
, n,
+ROG
,
+ROG
n = 1. Enable (default)
2. Disable
Caller number display preferentially.
Programs 103~107
(continued)
Button Sequence Value(s) Summary