Toshiba Strata CTX, Руководство по программированию, Страница: 195 / 533

Services
Least Cost Routing/Destination Restriction
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
9-9
Serv
ice
s
521 LCR Route Plan Digit Analysis Assignment
Prerequisite Program:
520 on page 9-8
This program builds the basic LCR Analysis Table.
522 LCR Exception Number Route Plans
Prerequisite Program:
521 on page 9-9
This command assigns up to 1280 dialed external digit strings to the Route Plan Exception Analysis Table
which assigns each string to 1 of 64 Route Choice Tables. The values expressed here are exceptions to the
values established in Program 521.
F
IELD
D
ESCRIPTION
00 Analysis Digits Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to
be assigned to a Route Plan Analysis Table.
Strings may be up to 32 digits long. There Route Plan Analysis Table may have
1280 members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards “X” and “N” where X = 0~9 and
N = 2~9 (default = no value).
01 Route Plan Number Enter the Route Plan number to which to assign the Analysis Digits.
Note Entering 0 deletes the Analysis Digits from the table to which they
had been assigned.
Possible values: 0~64 (default = 0)
F
IELD
D
ESCRIPTION
00 Exception Digits Enter the external digit strings (area codes, toll prefixes, service codes, etc.) to
be assigned to a Route Plan Exception Analysis Table.
Strings may be up to 32 digits long. The Exception Route Plan Analysis Table
may have 1280 members. A digit string can only be in one table at a time.
Possible values: Digits may include wild cards “X” and “N” where X = 0~9 and
N = 2~9 (default = no value).
01 Exception Table Enter the Route Plan Table in which to assign the Exception Digits.
Note Entering 0 deletes the Exception Digits from the table.
Possible values: 1~64 (default = 0)