47
Connecting to the RemotEye II via HTTP
A web session can be established once the hardware and software have been prepared.
Follow these steps to begin configuration:
3.
Launch the web browser.
4.
Enter the URL for RemotEye II in the browser’s address field. For example,
http://172.18.1.63. The home page of the RemotEye II will be displayed
once a connection is established (see Figure 16: RemotEye II HTTP Page on
page 48).
Perform the following procedure to setup the RemotEye II using its provided web
configuration pages.
1.
Select RemotEye II Management
→
RemotEye II Configuration to configure
RemotEye II.
2.
Click the Become Super User button at the bottom of the screen. Enter
TOSHIBA as the login name and public as the password (case sensitive).
Non-DHCP users continue on to step b. DHCP users may skip steps b to d.
3.
Enter the RemotEye II IP address.
4.
Enter the RemotEye II Gateway address in the network.
5.
Enter the RemotEye II Network Mask of the network.
6.
Enter the IP address of the Primary Time Server and Secondary Time Server
in the network.
7.
Click Set Value to save the settings.
8.
Select RemotEye II Management
→
Date and Time to set date and time.
9.
Enter the appropriate date and time in the specified format.
10.
Click Set Value to save the settings.
11.
Select RemotEye II Management
→
RemotEye II Control to enable or
disable the network protocols.
