115
Configuration
In this phase, users are able to change the parameters for the program. Users can
change the setting to fit their needs at any time by executing “uGuard.sh –e”. After
the first configuration process, this phase will show the last setting value as a default
setting.
Input USHA IP Address:
Input Client Name:
Warning Beep On? [y/n]
Shutdown delay time is 120 seconds?[y/n]
If “n” is selected,
Input shut down delay time:
Shut down script is loaded?[y/n]
If “n” is selected,
Input shut down script:
Force shut down delay time is 120 seconds?[y/n]
If “n” is selected,
Input force shut down delay time:
Shut Down Enable?[y/n]
