Toshiba MML-AP0074NH-E, Руководство по обслуживанию

Страница: 123 / 132

No. Part name Procedure Remarks
Screws for heat
exchanger (4 pcs)
m
Heat exchanger 1) Take off the pipe holder.
(Refrigerant
cycle assembly)
2) Remove screws for heat exchanger.
(4 pcs)
n
Horizontal Open a horizontal louver outward and
louver stretch the arm of louver base same as
the direction in the picture.
S
PMV motor <Cautions at work>
Using spanners by 14mm,17mm and
19mm,
remove the PMV motor.
To avoid deformation of the pipes, do
not use a monkey wrench.
1) Perform work of item
Q
.
2) Perform work of item
R
.
3) Remove the bundling band of PMV
motor lead wire.
4) Pull off butyl of PMV main unit until
the position shown in the right photo.
5) Using a spanner, remove PMV.
<Caution in reassembling>
Determine PMV motor lead wire
drawing-out position as same as that
before removing.
Return butyl rubber to the original
position.
122