Toshiba MML-AP0074NH-E, Руководство по обслуживанию

Страница: 94 / 132

EN
Q
Preset Operation
Set your preferred operation mode for future use.
The setting is memorized by the unit for future operation
(except airfl ow direction).
Select your preferred operation.
1
Press the PRESET button for 3 seconds to
memorize the setting.
The
P
mark is displayed.
When you press this button next time, the memorized
operation mode will be enabled.
1
Press the COMFORT SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer operation.
CAUTION
The COMFORT SLEEP mode is not enabled in the
DRY or
FAN ONLY operation.
1
Press the SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer operation.
Q
Comfort sleep operation
COMFORT SLEEP mode is a OFF timer operation with
automatic temperature and fan speed adjustment.
Q
Sleep timer operation
To start the sleep timer (OFF timer) operation.
NOTE
• For the cooling operation, the set temperature will
automatically increase 1 degree/hour for 2 hours
(maximum 2 degrees increase).
For the heating operation, the set temperature will
decrease.
• During group control operation, the set temperature
and the fan speed are not automatically adjusted. Only
off timer function is activated. PRESET
TEMP
FAN
1
PRESET
QUIET
COMFORT
SLEEP
MODE
TEMP
FAN
1
PRESET
QUIET
SWING
TIMER
ON
FILTER CHK CLOCK
OFF
CLR
SLEEP SET
FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
1112750101_(01_EN).indd 17 12/15/10 11:25 AM
Q
Adjusting airfl ow direction
• Adjust the airfl ow direction properly. Otherwise, it
might cause discomfort and make the room
temperature uneven.
• Adjust the vertical airfl ow using the remote controller.
• Adjust the horizontal airfl ow manually.
Adjust the vertical airfl ow
The air conditioner automatically adjusts the vertical
airfl ow direction in accordance with the operating
conditions when AUTO or A mode is selected.
To set the airfl ow direction you desire
Perform this function when the air conditioner is in
operation.
1
FIX button
Keep pressing or pressing briefl y the FIX button
on the remote controller to move the louver in the
desired direction.
• In subsequent operations, the vertical airfl ow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
To automatically swing the airfl ow direction
Perform this function when the air conditioner is in
operation.
1
SWING button
Press the SWING button on the remote controller.
• To stop the function, press the SWING button.
NOTE
• Operating angle of vertical airfl ow louver will be
different during cooling, dry and heating operation.
• Concerning airfl ow from the lower air outlet grille.
In the cooling operation, airfl ow is blown out only
from the upper air outlet grille under some operating
conditions. In the dry operation, airfl ow is blown out
only from the upper air outlet grille.
PRESET
QUIET
SWING FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
PRESET
QUIET
SWING FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
CAUTION
• The FIX and SWING buttons will be disabled when
the air conditioner is not in operation (including
when the ON timer is set).
• Do not operate the air conditioner for long hours
with the airfl ow direction set downward during the
cooling or dry operation.
Otherwise, condensation may occur on the surface
of the vertical airfl ow louver and cause dew
dripping.
• Do not move the vertical airfl ow louver manually.
Always use the FIX button.
If you move the louver manually, it may malfunction
during operation.
If the louver malfunctions, stop the air conditioner
once, and restart.
• When the air conditioner is started immediately
after it was stopped, the vertical airfl ow louver
might not move for 10 seconds or so.
• Louver operation is limited when performing group
control. (see page 12)
1112750101_(01_EN).indd 18 12/15/10 11:25 AM
93