Toshiba MML-AP0074NH-E, Руководство по обслуживанию

Страница: 93 / 132

EN
Q
Timer operation
Use the wired remote controller for timer setting if it is
also in use.
ON timer and OFF timer
Setting TIMER
1
ON/OFF TIMER button (
ON
or
OFF
)
Press the ON or OFF TIMER buttons as required.
• The previous timer setting is displayed and fl ashes
along with ON/OFF timer display.
Set the timer to the desired time.
Each press of the TIMER button changes the time in
ten minute steps.
Pressing the TIMER button continually changes the
time in one hour step.
2
SET
SET
button
Press the SET
SET
button to set the timer.
The timer time is indicated and the timer starts.
Cancelling TIMER
3
CLR
CLR
button
Press the CLR
CLR
button to cancel the timer setting.
CAUTION
• When you select the timer operation, the remote
controller automatically transmits the timer signal
to the indoor unit at the specifi ed time. Therefore,
keep the remote controller in a location where it
can transmit the signal to the indoor unit properly.
Otherwise, the time lag of up to 15 minutes will
occur.
• If you do not press the SET
SET
button within 30
seconds after setting the time, the setting will be
cancelled.
PRESET
QUIET
SWING
TIMER
ON
FILTER CHK CLOCK
OFF
CLR
SLEEP SET
FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
3
2
Once you select the timer operation mode, the settings
are saved in the remote controller.
Thereafter, the air conditioner will start operating under
the same conditions when you simply press the ON/OFF
button of the remote controller.
If the clock display is fl ashing, you cannot set the timer.
Follow the instructions in the section “SETTING THE
CLOCK” and then set the timer.
Combined timer (Setting both ON and OFF
timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in the
morning when you wake up or you return home.
Example :
To stop the air conditioner and start it again next morning.
9
Setting combined TIMER
1. Press the OFF TIMER
OFF
button to adjust the OFF
timer.
2. Press the ON TIMER
ON
button to adjust the ON timer.
3. Press the SET
SET
button.
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner when
you wake up and stop it when you leave the house.
Example :
To start the air conditioner next morning and stop it.
Operation again
Operation
Operation
Stop
Stop Stop
9
Setting combined TIMER
1. Press the ON TIMER
ON
button to adjust the ON timer.
2. Press the OFF TIMER
OFF
button to adjust the OFF
timer.
3. Press the SET
SET
button.
• Either ON or OFF timer function which is closer to the
current time, is activated fi rst.
• If the same time is set for both ON and OFF timers, no
timer operation is performed.
Also, the air conditioner may stop operating.
1112750101_(01_EN).indd 15 12/15/10 11:25 AM
Every day combined timer (setting both ON
and OFF timer simultaneously and activate
every day.)
This feature is useful when you want to use combined
timer at the same time every day.
9
Setting combined TIMER
1. Press the ON TIMER
ON
button to adjust the ON timer.
2. Press the OFF TIMER
OFF
button to adjust the OFF
timer.
3. Press the SET
SET
button.
4. After step 3, an arrow mark ( or ) fl ashes for about
3 seconds and during this fl ashing, press the SET
SET
button.
• During the every day timer is activating, both arrows
( , ) are indicated.
Cancel the timer operation
Press the CLR
CLR
button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, press SET button
briefl y and the present time is displayed about 3 seconds.
Q
High power operation
High power (Hi-POWER)
• The Hi-POWER (high power operation) mode
automatically controls room temperature, airfl ow and
operation mode so that the room is quickly cooled in
summer and warmed in winter.
Setting Hi-POWER mode
1
Hi-POWER button
Press the Hi-POWER button after starting any
operation. At the same time, the “Hi-POWER” mark
on the remote controller is indicated.
Cancelling Hi-POWER mode
1
Hi-POWER button
Press the Hi-POWER button once again.
At the same time, the “Hi-POWER” mark on the
remote controller goes out.
PRESET
QUIET
SWING FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
Q
Quiet operation
• The QUIET mode provides quiet operating status
by automatically setting the fan speed to the lowest
speed.
Setting QUIET mode
1
QUIET button
Press the QUIET button after starting any operation.
At the same time, the
mark is indicated.
Cancelling QUIET mode
1
QUIET button
Press the QUIET button once again.
At the same time, the
mark on the remote
controller disappears.
NOTE
Under certain conditions, the quiet operation may not
provide adequate cooling or heating due to the feature
of quietness.
CAUTION
The QUIET mode cannot be activated in the DRY
operation.
PRESET
QUIET
SWING FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
CAUTION
• The Hi-POWER mode cannot be activated in the
DRY and FAN ONLY operation and when the
ON TIMER operation is reserved.
• Hi-POWER mode is not available for group control.
When Hi-POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi-POWER mode will not be performed. Please
cancel the Hi-POWER mode.
1112750101_(01_EN).indd 16 12/15/10 11:25 AM
92