Toshiba HWS-P1105HR-E, Руководство по обслуживанию

Страница: 139 / 184

138
10. Hot water boost Setting
• This function is used when temporarily giving priority to the hot water supply operation. The hot water supply
operation is performed in preference to other operations with a target of the preset time (60 minutes) or the preset
temperature (75°C). Use this function when hot water is not used for a long time or before using a large amount
of hot water.
• The preset time and temperature settings can be changed to values with in a range of 30 to 180 minutes and 40
to 80°C. Ask the installation company to make the required changes to the settings.
• Start the hot water operation before making the setting.
It may not be able to go to the setting screen immediately after start. In that case, select “Hot water boost” again
after tens of seconds.
Hot water boost operation with the heat pump and heater ends when the water temperature reaches 75 °C;
however, the normal hot water supply operation automatically starts after 60 minutes even if the temperature is not
as high as 75 °C.
<How to set Hot water boost operation time and temperature>
In FC_08 or 09, the operation time and set temperature can be changed.
FC_08: Operation time change range 30 to 120 minutes (60 minutes: default)
FC_09: Set temperature change range 40 to 80 °C (75 °C: default)
1
Press the [ ] / [ ] button to select “Hot water boost” on the
MENU screen, then press the [ ] button.
2
Press the [ ] button to select “ON” on the Hot water boost
screen, then press the [ ] button. The mark appears on the
top screen.
• When the set time period has passed or the water temperature has
reached the set temperature, the Hot water boost operation ends
automatically.
Auto mode
MENU(1/2)
Night setback
Silent mode
Hot water boost
SET
Schedule timer
ON
Hot water boost
OFF
FIX