manualshive.com logo in svg

Toshiba e-studio 35, Руководство оператора

Поделиться
Скачать
Toshiba e-studio 35 Скачать руководство пользователя страница 131

5

5-17

Tips for using the Imposition feature of DocBuilder Pro

Saving imposed jobs

When you save an imposed job, DocBuilder Pro does two things:

•

If new data has been added to the temporary PDF file, it is written back to the 
GA-1040 under the name you specify in the Save As dialog box.

The default name that appears in the Save As dialog box is that of the original spool file 
with a new extension (.dbp). The original PostScript or PDF remains intact even after 
the converted file has been edited and saved in the Imposition window. 

•

If imposition data has changed, the data is written back to the GA-1040 and 
associated with the new PDF. 

Maintaining associated imposition data separately from the job’s PDF data allows 
DocBuilder Pro to impose in-RIP without modifying the PDF data, and allows you to 
reuse PDF data that has been modified in the imposition process. 

Содержание e-studio 35































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды