Toshiba DP3500, Руководство по обслуживанию

Страница: 92 / 257

December 2000 © TOSHIBA TEC 4 - 1 DP4500/3500 SUPPLIES
4. PRECAUTIONS FOR STORING/HANDLING SUPPLIES AND
PARTS
4.1 Precautions for Storing TOSHIBA Supplies
A. Toner and Developer Material
Toner and developer material should be stored in a shaded place where the ambient temperature is be-
tween 10 to 35°C (no condensation), and should be also protected from direct sunlight during transporta-
tion.
B. Photoconductive Drum
Like the toner and developer material, the photoconductive drums should be stored in a dark place where
the ambient temperature is between 10 to 35°C (no condensation). Keep the drum away from places where
it may be exposed to high humidity, chemicals and/or chemical gases.
C. Drum Cleaning Blade
This blade should be stored horizontally on a flat place where the ambient temperature is between 10 to
35°C, and should be also protected from high humidity, chemicals and/or chemical gases.
D. Fuser Roller
Keep the fuser roller away from place where it may be subjected to high humidity, chemicals and/or
chemical gases.
E. Cleaning Roller
Keep the cleaning roller away from place where it may be exposed to high humidity, chemicals and/or
chemical gases.
F. Copy Paper
Do not store copy paper in place where it may be subjected to high humidity.
After a package is opened, be sure to store the paper in a storage bag.
4.2 Checking and Cleaning of Photoconductive Drum
(1) Use of gloves
Since fingerprints or oil stains on the drum surface affects the quality of the copy image and degrades the
characteristics of the photoconductor, do not touch the drum surface with your bare hands.
(2) Handling precautions
As the drum surface is very sensitive, be sure to handle the drum carefully when installing or removing it
so as not to damage its surface.
When the drum is replaced with a new one, apply patting powder (lubricant) on the entire surface of the new
drum (including both edges to where the OPC is not coated) and separation finger of the cleaner before
installing them. The drum counter must be cleared to 0 (zero) in the setting mode 08 – 401.