Toshiba DP3500, Руководство по обслуживанию

Страница: 52 / 257

December 2000 © TOSHIBA TEC 2 - 13 DP4500/3500 ADJUSTMENT
(c) Image position adjustment of the primary scanning direction (Deviation adjustment of the scanner
primary scanning start position)
1. Turn ON the power while the digital keys [0] and [5] are pressed simultaneously.
n
(Adjustment mode)
2. Place a ruler on the original glass with its leading edge pushed against the rear side and its side along
the original scale on the left.
3. Press the [FAX] key and make a copy in the condition of A3 (LD), 100% and lower cassette.
4. Measure the distance B from the left edge of the paper to 10 mm of the copied image of the ruler.
5. Check if the distance B is within the range of 10±0.5 mm .
6. If not, change the value taking the following procedure, and repeat the steps 3 to 5 until the distance
falls within range.
<Procedure> (Adjustment mode)
n
(Enter the code [306] with the digital keys)
n
[START]
n
(Enter a value (acceptable values : 0 to 255) with the digital keys)
n
Press the [SET] icon or the [INTERRUPT] key to store the value in the RAM.
n
(“100% A” is displayed.)
* The larger the adjustment value, the more the image is shifted to the left and the
distance B becomes narrower (0.0423 mm/step).
Copied image of the ruler
Feeding direction
50
100
150
200
B