Toshiba DP3500, Руководство по обслуживанию

Страница: 25 / 257

DP4500/3500 ERROR CODES AND SELF-DIAGNOSIS 1 - 18 December 2000 © TOSHIBA TEC
Adjustment mode (05)
Accept- Operation
Code Items to adjust Mode Default able Contents procedure
value group
365
366
401
405
410
411
421
422
430
431
432
433
435
436
437
438
440
441
442
443
444
445
448-0
448-1
448-2
RADF leading for single-sided
edge position paper
adjustment for double-sided
paper
Fine adjustment of polygonal motor
rotation speed (Reproduction ratio
adjustment of primary scanning direc-
tion)
Adjustment of primary scanning laser
writing start position
Fine adjustment of For units other
main motor rotation than the fax
speed
For the fax
(Reproduction ratio
adjustment of sec-
ondary scanning
direction)
Top margin adjustment (blank area
at the leading edge of the paper)
Left margin adjustment (blank area
at the left of the paper along the pa-
per feeding direction)
Right margin adjustment (blank area
at the right of the paper along the pa-
per feeding direction)
Bottom margin adjustment (blank
area at trailing edge of paper)
Top margin adjustment (blank area
at the leading edge of the paper)
Left margin adjustment (blank area
at the left of the paper along the pa-
per feeding direction)
Right margin adjustment (blank area
at the right of the paper along the pa-
per feeding direction)
Bottom margin adjustment (blank
area at the trailing edge of the paper)
Secondary
Upper cassette
scanning laser Lower cassette
write start position Bypass feed
LCF
PFP
ADU
Paper aligning PFP upper cas-
amount adjustment sette/Long size
(at the copier regis- PFP upper cas-
tration section)
sette/Middle size
PFP upper cas-
sette/Short size
ALL 50 0~100
ALL 50 0~100
PRT 133 0~255
PPC 129 0~255
PPC 128 0~255
PRT 128 0~255
ALL 138 0~255
FAX 139 0~255
PPC 0 0~255
PPC 0 0~255
PPC 0 0~255
PPC 0 0~255
PRT 24 0~255
PRT 0 0~255
PRT 0 0~255
PRT 0 0~255
ALL 7 0~15
ALL 24 0~40
ALL 8 0~15
ALL 8 0~15
ALL 8 0~15
ALL 8 0~15
ALL 10 0~63
ALL 10 0~63
ALL 8 0~63
When the value increases by “1”,
the copied image of original fed from
the RADF shifts toward the trailing
edge of paper by approx. 0.1mm.
When the value increases by “1”,
the reproduction ratio of the pri-
mary scanning direction increases
by approx. 0.07%. (approx.0.5mm/
4steps)
When the value increases by “1”,
the writing start position shifts to the
front side by approx. 0.0423mm.
When the value increases by “1”,
the reproduction ratio of the sec-
ondary scanning direction in-
creases by approx. 0.055%.
(approx. 0.5mm/4steps)
When the value increases by “1”,
the blank area becomes wider by
approx. 0.0423mm.
When the value increases by “1”,
the image shifts toward the lead-
ing edge of paper by approx.
0.4mm.
When the value increases by “1”,
the aligning amount increases by
approx. 0.8mm.
<Paper length>
Long size:
330mm or longer
Middle size: 220mm~329mm
Short size:
219mm or shorter
1
1
5
1
1
1
5
1
1
1
1
1
1
1
1
1
5
5
5
5
5
5
3
3
3