Torqeedo Cruise 2.0 FP, Руководство по эксплуатации

Страница: 74 / 96

74
Deutsch
English
• The magnetic kill switch disconnects the energy supply immediately,
and switches off the Cruise system. The propeller then comes to a stop.
You can only start the motor again if you first replace the magnetic key
and then move the remote throttle to the central position (stop position).
• The magnetic kill switch may delete magnetic information media (es-
pecially credit and debit cards etc.). Keep the magnetic kill switch away
from credit cards and other magnetic information media.
5.2 Multifunction display with signal tone
The multifunction display on the remote throttle shows important
operation data for your motor, as well as three buttons that are used to
perform many setup and communication functions. Pushing the power
button “ON/OFF“ for 1 second will turn the motor on. Pressing it again
will turn the motor off again. (Remember: when using Power 26-104
batteries with the Cruise FP, pressing the power button for 5 seconds or
longer will turn off the batteries.) The motor may be turned off in any
operation mode. After one hour with no activity, the system will turn off
automatically. Press the power button to turn the system back on.
Pressing the “setup“ button allows you to adjust the units of measure used on your mul-
tifunction display. To do so, follow the instructions given in chapter 5.3.
Sample message in normal operation:
Battery charge status in percent
Remaining range at current speed
Speed over ground
Current consumption in Watts