Torqeedo Cruise 2.0 FP, Руководство по эксплуатации

Страница: 70 / 96

70
Deutsch
English
Connecting of Cruise FP to four 12 V batteries
Bridge cable
Bridge cable
Cable set
12 V battery
12 V battery
12 V battery
12 V battery
Bridge cable
Optional - connecting additional 12 V batteries
in parallel to increase capacity
3. Now connect the high current plug of the cable set to the high current plug of the
motor.
4. Switch the main switch of the cable set to the ”ON“ position.
Batteries are now connected in series. Total capacity (Wh) and voltage (V) of battery bank
is multiplied by the number of batteries connected in series.
The capacity in amp-hours (Ah) does not increase with the number of batteries connec-
ted in series, (for example: two 12 V/100 Ah (1,200 Wh) batteries connected in series will
result in a battery bank of 24V with 100 Ah or 2,400 Wh capacity).
Cable set is equipped with a 125 A fuse. In case of a short circuit, fuse cuts circuit and
prevents further damage.
Once batteries are properly installed, input the battery bank data (number, type and ca-
pacity of batteries) to the onboard computer via the remote throttle (chapter 5.3, “Setup
mode“). This allows the correct calculation of state of charge and remaining range.