Torqeedo Cruise 2.0 FP, Руководство по эксплуатации

Страница: 55 / 96

55
Deutsch
English
WATCH OUT!
This symbol warns of danger of damage that may be caused to or by
the Cruise sytem.
Below you will find some of the most critical instructions for using your Torqeedo motor.
Apart from these instructions, please observe the complete operating manual to prevent
damage to or by your motor.
• The cable set connections and main switch must be protected from moisture.
• Only operate the motor while the propeller is submerged in water. Running your
motor outside of the water risks damage to shaft seals, which protect against water
intrusion. Additionally, the motor might overheat.
• Cruise FP models are protected against dirt and water according to protection rating
IP67.
• If the motor malfunctions, an error code may be shown on the display. After resol-
ving the error, the motor may be restarted from the neutral throttle position or it may
be necessary to switch the motor off and on to reset. You can find descriptions and
details in the “Error messages/troubleshooting” chapter of this operating manual.
• When leaving the boat turn main switch to “OFF” position to prevent accidental ope-
ration of motor and limit battery discharge during storage.
• Inspect the sacrificial anode on a regular basis, at least every 6 months. Replace if
needed.
• Please make sure to use only galvanically insulated chargers. Your dealer can assist
you in selecting the proper charger. Turn the cable set‘s main switch to the “OFF”
position to limit the risk of electrolysis damage.
• When using the Cruise FP with a Torqeedo Power battery, a onetime set-up (enume-
ration) process is required to establish the communication between the components.
See chapter 5.3.1.1.