Toro 41107-210000101, Руководство оператора и инструкция по установке

Страница: 59 / 80

59
The Spray Pro
™
features a large easy-to-read
liquid crystal display, lighted selection dial and
lighted panel for night use.
NOTE: The Spray Pro™ is preprogrammed
with values for speed, flow, and width
calibrations. The initial measurement units are
US gallons per acre, which can be changed.
APPLICATION RATE:
Displays gallons (liters)
of liquid applied per acre (hectare).
KEY FUNCTIONS:
RUN/HOLD:
Key for manual operation of
Spray Pro
™
. Changes status from Run to Hold.
CAL:
This key is used to enter and exit the
Calibration Mode.
PROGRAM KEYS:
Used to calibrate the
system.
•
RESET
clears the selected counter when
held for three seconds.
• The "
+
" key increases the figure displayed
in the readout, while "
-
" decreases it when in
CAL.
SPRAY PRO ™ CONSOLE FUNCTIONS
FIG. 1
CALIBRATION FLOW:
Displays total number
of gallons (liters) passed through the flowmeter
while in Run Mode. Primarily used in flowmeter
fine-tuning. May be reset.
WIDTH:
Used in calibration mode to enter the
working width of your sprayer.
CALIBRATION DISTANCE:
D i s p l a y s
distance traveled in feet (meters), while in Run
Mode. May be reset.
SPEED CAL:
Used in calibration mode to enter
the speed calibration value.
FLOWMETER CAL:
Used to enter the
calibration value for the flowmeter.
WARNING LIGHT:
When in CAL mode, light
should be constant.
SPEED:
Displays ground speed in miles per hour
(kilometers per hour).
TEST SPEED:
Used to simulate ground speed
for pre-field checkout.
1932-1200