Toro 41107-210000101, Руководство оператора и инструкция по установке

Страница: 31 / 80

31
MAINTENANCE
WARNING
Servicing the vehicle while the engine is
running or vehicle is not properly secured,
could result in personal injury or death.
Before servicing or making adjustments
to the vehicle, set parking brake, stop
engine, and remove key from the switch.
The MULTI PRO
®
1200 has 37 grease fittings that
must be lubricated regularly with No. 2 General
Purpose Lithium Base Grease. If the machine is
operated under normal conditions, lubricate all
bearings and bushings every 100 hours of
operation. More frequent lubrication is required
if used for heavy duty vehicle operations.
The grease fitting locations and quantities are:
The Front Suspension, which includes Spindle
(2) (each side), Tie Rod (2) (each side), Center
Steering Pivot (1), Steering Cylinder Tie Rod Ends
(2). The Diaphram Pump(1), Transaxle input
Shaft (1), Universal Joints (2), Rear Axle (9) (each
side) and Boom Hinges (2) are additional
locations.
1. Wipe grease fitting clean so foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe off excess grease.
1
1829
1828
2
1
1
1
FIG. 4
FIG. 5
1. Rear Axle (4 total)
2. Output Drive Shaft Zerk
FIG. 6
1. Transaxle Input Shaft
2. Universal Joint
LUBRICATION:
3
2
1
1805
2
1. Spindle
2. A-Arm
3. Tie Rod